top of page
Hire recording and video conference mics Auckland - Ashken Hire

AT - Condenser Boundary Microphone

Designed for applications e.g high-quality sound reinforcement & professional recordIng (inc cable)

  • From 50 New Zealand dollars

Service Description

UniGuardTM RFI-shielding technology offers outstanding rejection of radio frequencyinterference(RFI). Superior off-axis rejection for maximum gain before feedback. Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance. Heavy die-cast case and non-silp silicon foam bottom pads minimize coupling of surface vibration to the microphone. Low-profile design with low-reflectance finish for minimum visibility. AT871UG has contained electronics eliminate need for external power module. The AT871UG requires 9V to 52V phantom power for operation only. AT871UG Specifications Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface) Frequency Response 30 ~ 20,000 Hz Open Circuit Sensitivity -34 dB(19.9mV) re 1V at 1Pa Impedance 200 Ω Maximum Input Sound Level 133 dB SPL (1KHz,THD 1%) Dynamic Range (Typical) 103 dB, 1 kHz at Max SPL Signal-To-Noise Ratio 67 dB, 1 kHz at 1Pa Phantom Power 415 g Dimensions 17.0mm x 145.0mm x 120.0mm (H x W x D) Angle 120° Cable 7.6 m long, 3.2 mm diameter, 2-conductor shielded cable with TA3F-type connector and XLRM-type connectors.


Cancellation Policy

5 Days or more notice before delivery - Refund Less than 5 Days Notice before delivery - Nil Refund (We can discuss an available later date for setup as an alternative) Weather - If weather affects your event and our packages involve an outdoor setup, we will work on a case by case basis to either defer to another date or offer equipment for indoor - still charged at the initial rate.


Contact Details

0275748081

info@ashken.co.nz

Auckland, New Zealand


bottom of page